Top view of the pin field, drawn to scale from the nominal pitch 7.2mm and the pin layout decoded from the KiCad footprint name AMASS_XT60-F_1x02_P7.20mm_Vertical (approved code kicad-footprint-name, KiCad Library Convention F3.6): 2 positions in one row. Pin size and the side view of the stated mounting (through hole, vertical) are schematic, and the housing is not drawn because the record gives no housing size. Pins are numbered in the usual order, which the record does not state: pin 1 at the left.DC barrel connector: a picture of the part type, not this model. How it works
Amass XT60-F
Amass XT60 series connector, part number XT60-F: pitch 7.2 mm; 2 positions; 1 row(s); vertical; through hole. From the KiCad footprint AMASS_XT60-F_1x02_P7.20mm_Vertical (library Connector_AMASS); the name fields follow the KiCad Library Convention F3.6.
footprint name field P7.20mm = pitch in mm, per the KiCad Library Convention footprint naming rules F3.6 (connector names carry a Pitch field) and F2.2 (example P1.65mm = 1.65mm pitch); raw/kicad-klc/repo/content/footprint/F3/F3.6.adoc and F2/F2.2.adoc
footprint name field 1x02 = one row of 2 pins, per the KiCad Library Convention connector naming rule F3.6 (single row connectors are written 1x followed by the number of pins)
footprint name field 1x02 = one row of 2 pins, per the KiCad Library Convention connector naming rule F3.6 (single row connectors are written 1x followed by the number of pins)