Parts › Materials › Generic Aluminum Generic
0 pickedCompare
Aluminium stock: 3 mm sheet with blue protective film (a corner peeled), angle 50 x 50 x 5, channel 40 x 30 x 4, flat bar 25 x 10
Aluminium: a picture of the part type, not this model. How it works

Generic Aluminum Generic

FreeCAD library card for Aluminum Generic; values are card typicals, check the card's cited source before design use.

Key specifications

Key specifications
Density2.7 g/cm³ source
Young's modulus70 GPa source
Tensile strength310 MPa source
Poisson's ratio0.35 ratio source
Thermal conductivity237 W/(m·K) source
Specific heat897 J/kg/K source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Density2700 kg/m^3 = 2.7 g/cm³FreeCAD material card (card licence LGPL-2.1-or-later); card SourceURL: none givenclaimgithub.com 2026-11-08“Density: "2700 kg/m^3"”
Young's modulus70000 MPa = 70 GPaFreeCAD material card (card licence LGPL-2.1-or-later); card SourceURL: none givenclaimgithub.com 2026-11-08“YoungsModulus: "70000 MPa"”
Tensile strength310 MPaFreeCAD material card (card licence LGPL-2.1-or-later); card SourceURL: none givenclaimgithub.com 2026-11-08“UltimateTensileStrength: "310 MPa"”
Poisson's ratio0.35 ratioFreeCAD material card (card licence LGPL-2.1-or-later); card SourceURL: none givenclaimgithub.com 2026-11-08“PoissonRatio: "0.35"”
Thermal conductivity237 W/m/KFreeCAD material card (card licence LGPL-2.1-or-later); card SourceURL: none givenclaimgithub.com 2026-11-08“ThermalConductivity: "237.0 W/m/K"”
Specific heat897 J/kg/KFreeCAD material card (card licence LGPL-2.1-or-later); card SourceURL: none givenclaimgithub.com 2026-11-08“SpecificHeat: "897.0 J/kg/K"”

Variations from this maker

Aluminum 6061-T6 · Aluminum 7075-T6