Parts › Materials › Generic PC-Molded
0 pickedCompare
Engineering plastic stock: 12 mm white POM sheet, black POM rod 30 mm, PEEK rod 20 mm, blue cast nylon billet 50 mm
Engineering plastic: a picture of the part type, not this model. How it works

Generic PC-Molded

FreeCAD library card for PC-Molded; values are card typicals, check the card's cited source before design use.

Key specifications

Key specifications
Density1.2 g/cm³ source
Young's modulus2.2 GPa source
Yield strength80 MPa source
Tensile strength60 MPa source
Poisson's ratio0.37 ratio source
Thermal conductivity0.2 W/(m·K) source
Specific heat1250 J/kg/K source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Density1200 kg/m^3 = 1.2 g/cm³FreeCAD material card (card licence CC-BY-3.0); card SourceURL: none givenReview note: Corrected: the card writes the number with a decimal comma, and the part after the comma had been read into the unit.claimgithub.com 2026-11-08“Density: "1200,00 kg/m^3"”
Young's modulus2200 MPa = 2.2 GPaFreeCAD material card (card licence CC-BY-3.0); card SourceURL: none givenReview note: Corrected: the card writes the number with a decimal comma, and the part after the comma had been read into the unit.claimgithub.com 2026-11-08“YoungsModulus: "2200,00 MPa"”
Yield strength80 MPaFreeCAD material card (card licence CC-BY-3.0); card SourceURL: none givenReview note: Corrected: the card writes the number with a decimal comma, and the part after the comma had been read into the unit. This card gives a yield strength (80 MPa) above its ultimate tensile strength (60 MPa); check another source before design use.claimgithub.com 2026-11-08“YieldStrength: "80,00 MPa"”
Tensile strength60 MPaFreeCAD material card (card licence CC-BY-3.0); card SourceURL: none givenReview note: Corrected: the card writes the number with a decimal comma, and the part after the comma had been read into the unit. This card gives a yield strength (80 MPa) above its ultimate tensile strength (60 MPa); check another source before design use.claimgithub.com 2026-11-08“UltimateTensileStrength: "60,00 MPa"”
Poisson's ratio0.37 ratioFreeCAD material card (card licence CC-BY-3.0); card SourceURL: none givenclaimgithub.com 2026-11-08“PoissonRatio: "0.37"”
Thermal conductivity0.2 W/m/KFreeCAD material card (card licence CC-BY-3.0); card SourceURL: none givenReview note: Corrected: the card writes 0,20 W/m/K with a decimal comma, which is 0.20 W/m/K. The value had been stored as 0.claimgithub.com 2026-11-08“ThermalConductivity: "0,20 W/m/K"”
Specific heat1250 J/kg/KFreeCAD material card (card licence CC-BY-3.0); card SourceURL: none givenReview note: Corrected: the card writes the number with a decimal comma, and the part after the comma had been read into the unit.claimgithub.com 2026-11-08“SpecificHeat: "1250,00 J/kg/K"”