Parts › Materials › Generic Magnesium alloys (general)
0 pickedCompare
Metal stock: aluminium plate 8 mm with 25 mm aluminium tubes, a steel bar and a copper bar
Magnesium: a picture of the part type, not this model. How it works

Generic Magnesium alloys (general)

Lightest structural metals; good machinability, poor creep and corrosion behaviour unless coated.

Key specifications

Key specifications
Density1.8 g/cm³ source
Young's modulus42 GPa source
Tensile strength135 to 285 MPa, 180 to 440 MPa source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Density1.8 g/cm3encyclopedia typical value (Wikipedia, CC BY-SA), not a maker datasheetclaimen.wikipedia.org 2026-11-08“Typical density is 1.8 g/cm3 and Young's modulus is 42 GPa”
Young's modulus42 GPaencyclopedia typical value (Wikipedia, CC BY-SA), not a maker datasheet; casting alloysclaimen.wikipedia.org 2026-11-08“Typical density is 1.8 g/cm3 and Young's modulus is 42 GPa”
Tensile strength135 to 285 MPa stated as tensile strengthencyclopedia typical value (Wikipedia, CC BY-SA), not a maker datasheet; casting alloysclaimen.wikipedia.org 2026-11-08“tensile strength 135–285 MPa”
180 to 440 MPa stated as tensile strengthencyclopedia typical value (Wikipedia, CC BY-SA), not a maker datasheet; wrought alloysclaimen.wikipedia.org 2026-11-08“tensile strength is 180–440 MPa”