Parts › Encoders and magnetic sensors › MagnTek MT6701QT
0 pickedCompare
QFN-16: 16-pin quad flat no-lead package, top view and side view14589121316
Outline for the package name QFN-16. This part's record lists no package dimensions; see the datasheet. 16 pads, 4 per side. Pads are under the body and shown through it. Pins are numbered in the usual order, which the record does not state: pin 1 at the top left, then counter-clockwise. Pad pitch, pad size and thickness are schematic. The package name does not mark an exposed pad; check the datasheet for one.
Magnetic angle encoder: 8 mm diametric magnet on a 6 mm shaft over the sensor chip on a 22 mm board
Magnetic position sensor: a picture of the part type, not this model. How it works

MagnTek MT6701QT

Magnetic angle/position sensor MT6701QT: package QFN-16. Ratings as stated in the KiCad symbol description (symbol MT6701QT, library Sensor_Magnetic); KiCad's default footprint is QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm. The maker comes from the host of the datasheet link named in the KiCad symbol (magntek.com.cn); the link was not opened.

Key specifications

Key specifications
PackageQFN-16 source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
PackageQFN-16specgitlab.com 2026-11-16“Hall Based Angle Position Encoder Sensor, I2C, SSI, ABZ & UVW interfaces, 3.3..5V supply, QFN-16”