Parts › Materials › Generic PEEK
0 pickedCompare
Engineering plastic stock: 12 mm white POM sheet, black POM rod 30 mm, PEEK rod 20 mm, blue cast nylon billet 50 mm
Engineering plastic: a picture of the part type, not this model. How it works

Generic PEEK

High-temperature semicrystalline thermoplastic with strong chemical resistance.

Key specifications

Key specifications
Density1.32 g/cm³ source
Young's modulus3.6 GPa source
Tensile strength90 to 100 MPa source
Melting point343 °C source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Density1.32 g/cm3encyclopedia typical value (Wikipedia, CC BY-SA), not a maker datasheetclaimen.wikipedia.org 2026-11-08“Density (ρ) 1.32 g/cm3”
Young's modulus3.6 GPaencyclopedia typical value (Wikipedia, CC BY-SA), not a maker datasheetclaimen.wikipedia.org 2026-11-08“Young's modulus (E) 3.6 GPa”
Tensile strength90 to 100 MPa stated as tensile strengthencyclopedia typical value (Wikipedia, CC BY-SA), not a maker datasheetclaimen.wikipedia.org 2026-11-08“Tensile strength (σt) 90–100 MPa”
Melting point343 °Cencyclopedia typical value (Wikipedia, CC BY-SA), not a maker datasheetclaimen.wikipedia.org 2026-11-08“Melting temperature (Tm) 343 °C”
Glass transition temperature143 °Cencyclopedia typical value (Wikipedia, CC BY-SA), not a maker datasheetclaimen.wikipedia.org 2026-11-08“Glass transition temperature (Tg) 143 °C”

Variations from this maker

PEEK-Generic