Parts › Materials › Generic PLA
0 pickedCompare
Engineering plastic stock: 12 mm white POM sheet, black POM rod 30 mm, PEEK rod 20 mm, blue cast nylon billet 50 mm
Engineering plastic: a picture of the part type, not this model. How it works

Generic PLA

Bio-based, stiff, easy to print; softens near 60 C.

Key specifications

Key specifications
Density1.24 g/cm³, 1.21 to 1.43 g/cm³ 2 sources
Young's modulus3.64 GPa source
Yield strength35.9 MPa source
Tensile strength26.4 MPa source
Poisson's ratio0.36 ratio source
Thermal conductivity0.13 W/(m·K) source
Specific heat1800 J/kg/K source
Melting point150 to 160 °C source

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Density1240 kg/m^3 = 1.24 g/cm³FreeCAD card Thermoplast/PLA-Generic.FCMat ('PLA', author Uwe Stöhr; card line License: "CC-BY-3.0"); card SourceURL: https://www.sd3d.com/wp-content/uploads/2017/06/MaterialTDS-PLA_01.pdfclaimgithub.com 2026-11-16“Density: "1240 kg/m^3"”
1210 to 1430 kg/m3 = 1.21 to 1.43 g/cm³infobox cites [1]; Wikipedia article Polylactic acid, revision 1385607179claimen.wikipedia.org 2026-11-16“Density 1210–1430 kg/m3[1]”
Young's modulus3640 MPa = 3.64 GPaFreeCAD card Thermoplast/PLA-Generic.FCMat ('PLA', author Uwe Stöhr; card line License: "CC-BY-3.0"); card SourceURL: https://www.sd3d.com/wp-content/uploads/2017/06/MaterialTDS-PLA_01.pdfclaimgithub.com 2026-11-16“YoungsModulus: "3640 MPa"”
Yield strength35.9 MPaFreeCAD card Thermoplast/PLA-Generic.FCMat ('PLA', author Uwe Stöhr; card line License: "CC-BY-3.0"); card SourceURL: https://www.sd3d.com/wp-content/uploads/2017/06/MaterialTDS-PLA_01.pdfclaimgithub.com 2026-11-16“YieldStrength: "35.9 MPa"”
Tensile strength26.4 MPaFreeCAD card Thermoplast/PLA-Generic.FCMat ('PLA', author Uwe Stöhr; card line License: "CC-BY-3.0"); card SourceURL: https://www.sd3d.com/wp-content/uploads/2017/06/MaterialTDS-PLA_01.pdfclaimgithub.com 2026-11-16“UltimateTensileStrength: "26.4 MPa"”
Poisson's ratio0.36 ratioFreeCAD card Thermoplast/PLA-Generic.FCMat ('PLA', author Uwe Stöhr; card line License: "CC-BY-3.0"); card SourceURL: https://www.sd3d.com/wp-content/uploads/2017/06/MaterialTDS-PLA_01.pdfclaimgithub.com 2026-11-16“PoissonRatio: "0.36"”
Thermal conductivity0.13 W/m/KFreeCAD card Thermoplast/PLA-Generic.FCMat ('PLA', author Uwe Stöhr; card line License: "CC-BY-3.0"); card SourceURL: https://www.sd3d.com/wp-content/uploads/2017/06/MaterialTDS-PLA_01.pdfclaimgithub.com 2026-11-16“ThermalConductivity: "0.130 W/m/K"”
Specific heat1800 J/kg/KFreeCAD card Thermoplast/PLA-Generic.FCMat ('PLA', author Uwe Stöhr; card line License: "CC-BY-3.0"); card SourceURL: https://www.sd3d.com/wp-content/uploads/2017/06/MaterialTDS-PLA_01.pdfclaimgithub.com 2026-11-16“SpecificHeat: "1800 J/kg/K"”
Melting point150 to 160 °Cencyclopedia typical value (Wikipedia, CC BY-SA), not a maker datasheetclaimen.wikipedia.org 2026-11-08“Melting point 150 to 160 °C”
Glass transition temperature60 °CWikidata statement; reference DOI 10.1533/9780857097033.1.163 (P356); P5670 is 'glass transition temperature' (raw/wikidata-p5670/67a1aaf337e773b2.txt); unit Q25267 is 'degree Celsius' (raw/wikidata-q25267/b36b1ab5b3d19d5b.txt); item Q413769 revision 2542472535claimwikidata.org 2026-11-16“"datavalue":{"value":{"amount":"+60","unit":"http://www.wikidata.org/entity/Q25267"}”
Thermal expansion coefficient4.1e-05 m/m/KFreeCAD card Thermoplast/PLA-Generic.FCMat ('PLA', author Uwe Stöhr; card line License: "CC-BY-3.0"); card SourceURL: https://www.sd3d.com/wp-content/uploads/2017/06/MaterialTDS-PLA_01.pdfclaimgithub.com 2026-11-16“ThermalExpansionCoefficient: "0.000041 m/m/K"”

Variations from this maker

PLA