
Generic fan17x8
Square axial fan frame 17x8 (fan17x8). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/fans.scad; positions read from the accessor functions in vitamins/fan.scad.
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Blade opening diameter | 16 mm | NopSCADlib vitamins/fans.scad:41 row fan17x8, position 2 = fan_bore() 'Diameter of the hole for the blades' (vitamins/fan.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“fan17x8 = [17, 8, 16, 6.75, M2_cap_screw, 12.6, 8, 100, 7, 0, undef];” |
| Depth | 8 mm | NopSCADlib vitamins/fans.scad:41 row fan17x8, position 1 = fan_depth() 'Depth of fan' (vitamins/fan.scad:34); unit mm: the BOM string appends mm to width = fan_width(type) and depth = fan_depth(type) (vitamins/fan.scad:53) | spec | github.com 2026-11-16“fan17x8 = [17, 8, 16, 6.75, M2_cap_screw, 12.6, 8, 100, 7, 0, undef];” |
| Width | 17 mm | NopSCADlib vitamins/fans.scad:41 row fan17x8, position 0 = fan_width() 'Width of square' (vitamins/fan.scad:33); unit mm: the BOM string appends mm to width = fan_width(type) and depth = fan_depth(type) (vitamins/fan.scad:53) | spec | github.com 2026-11-16“fan17x8 = [17, 8, 16, 6.75, M2_cap_screw, 12.6, 8, 100, 7, 0, undef];” |