Cooling
21 parts with data · 130 more listed by name. Columns, units and filters follow this category's display rules. Rows run from small to large. Each cell links through the part page to its source. m marks an independent measurement. How it works
Pick a type
Fan (15) price $29.00, median $29.00
| Pick to compare | Maker | Model | Size | Nominal voltageV | Rated currentA | Max. fan speedrpm | Airflowcfm | Static pressure | Massg | Price, 1 pcUSD |
|---|---|---|---|---|---|---|---|---|---|---|
| Adafruit | Miniature 5V Cooling Fan with Molex PicoBlade ConnectorMiniature 5V Cooling Fan with Molex PicoBlade Connector | 30 x 30 x 8 mm | 5 | 0.2 | ||||||
| Adafruit | Miniature 5V Cooling Fan (30x30x8 mm)Miniature 5V Cooling Fan (30x30x8 mm) | 30 x 30 x 8 mm |
Listed without specifications (13)
These parts have no value in the columns above. Their part pages hold any other values and the prices.
| Pick to compare | Maker | Model | Price, 1 pcUSD |
|---|---|---|---|
| Generic | fan120x25fan120x25 | ||
| Generic | fan17x8fan17x8 | ||
| Generic | fan25x10fan25x10 | ||
| Generic | fan30x10fan30x10 | ||
| Generic | fan40x11fan40x11 | ||
| Generic | fan50x15fan50x15 | ||
| Generic | fan60x15fan60x15 | ||
| Generic | fan60x25fan60x25 | ||
| Generic | fan70x15fan70x15 | ||
| Generic | fan80x25fan80x25 | ||
| Generic | fan80x38fan80x38 | ||
| mjbots | moteus cooling fanmoteus cooling fan | $29.00 | |
| Noctua | NF-A4x20 5VNF-A4x20 5V |
Thermal paste (2)
| Pick to compare | Maker | Model | Thermal conductivityW/(m·K) | Price, 1 pcUSD |
|---|---|---|---|---|
| Generic | Liquid-metal (galinstan-type) thermal compoundLiquid-metal (galinstan-type) thermal compound | 13 W/(m·K) | ||
| Generic | Silver-filled thermal compoundSilver-filled thermal compound | 3-8 W/(m·K) |
Heat sink (4) price $19.00 to $29.00, median $29.00
Listed without specifications (4)
These parts have no value in the columns above. Their part pages hold any other values and the prices.
| Pick to compare | Maker | Model | Price, 1 pcUSD |
|---|---|---|---|
| mjbots | moteus r4 heat spreadermoteus r4 heat spreader | $29.00 | |
| mjbots | moteus-c1 heat spreadermoteus-c1 heat spreader | $19.00 | |
| mjbots | moteus-n1 heat spreadermoteus-n1 heat spreader | $29.00 | |
| mjbots | moteus-x1 heat spreadermoteus-x1 heat spreader | $29.00 |
How it works

Photo: Erkaha, CC BY-SA 4.0. source · credits
Types and how they differ
Passive cooling (heat sink, pad, paste): Heat spreads through metal fins and interface material and leaves by convection and radiation; no moving parts.
Variations: Finned aluminium or copper heat sink; Gap pads and paste (silver paste 3 to 8 W/(m·K); liquid metal over 13); Phase-change pads
For: Silent and no failure from fans; No power draw; Good for sealed enclosures
Against: Limited by surface area and air flow; Pads add thermal resistance; Pump-out and dry-out of paste over time
Sources: 1, 2, 3
Fan (forced air) cooling: A fan moves air across a heat sink; airflow and noise are set by fan size and speed.
Variations: Small blowers (Pi 5 Active Cooler, 8000 RPM); 120 mm PWM case fans (ARCTIC P12, 200 to 1800 rpm); Zero-rpm modes at low PWM
For: Several times the heat removal of passive; Cheap and standard sizes; PWM speed control
Against: Noise and dust; Bearing wear; Needs airflow path in the robot body
Sources: 1
Liquid cooling: A pumped liquid carries heat from a cold plate to a remote radiator; used where air cannot remove the heat.
Variations: Cold plate plus radiator loop; Immersion; Water-cooled modules in large actuators
For: High heat flux; Heat can be moved away from the hot part; Quiet at the heat source
Against: Pump, hoses and leak risk; More mass and parts; Rare in small robots
Sources: 1, 2