Parts › Cooling › Generic fan50x15
0 pickedCompare
Axial fan 80 x 80 x 25 mm, seven blades, with its lead
Fan: a picture of the part type, not this model. How it works

Generic fan50x15

Square axial fan frame 50x15 (fan50x15). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/fans.scad; positions read from the accessor functions in vitamins/fan.scad.

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Blade opening diameter48 mmNopSCADlib vitamins/fans.scad:37 row fan50x15, position 2 = fan_bore() 'Diameter of the hole for the blades' (vitamins/fan.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“fan50x15 = [50, 15, 48, 20, M4_dome_screw, 25, 12.5,100, 7, 0, undef];”
Depth15 mmNopSCADlib vitamins/fans.scad:37 row fan50x15, position 1 = fan_depth() 'Depth of fan' (vitamins/fan.scad:34); unit mm: the BOM string appends mm to width = fan_width(type) and depth = fan_depth(type) (vitamins/fan.scad:53)specgithub.com 2026-11-16“fan50x15 = [50, 15, 48, 20, M4_dome_screw, 25, 12.5,100, 7, 0, undef];”
Width50 mmNopSCADlib vitamins/fans.scad:37 row fan50x15, position 0 = fan_width() 'Width of square' (vitamins/fan.scad:33); unit mm: the BOM string appends mm to width = fan_width(type) and depth = fan_depth(type) (vitamins/fan.scad:53)specgithub.com 2026-11-16“fan50x15 = [50, 15, 48, 20, M4_dome_screw, 25, 12.5,100, 7, 0, undef];”