Parts › Cooling › Generic fan60x25
0 pickedCompare
Axial fan 80 x 80 x 25 mm, seven blades, with its lead
Fan: a picture of the part type, not this model. How it works

Generic fan60x25

Square axial fan frame 60x25 (fan60x25). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/fans.scad; positions read from the accessor functions in vitamins/fan.scad.

· Maker or source page

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Blade opening diameter57 mmNopSCADlib vitamins/fans.scad:35 row fan60x25, position 2 = fan_bore() 'Diameter of the hole for the blades' (vitamins/fan.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29)specgithub.com 2026-11-16“fan60x25 = [60, 25, 57, 25, M4_dome_screw, 31.5, 3.6, 64, 7, 0, 63];”
Depth25 mmNopSCADlib vitamins/fans.scad:35 row fan60x25, position 1 = fan_depth() 'Depth of fan' (vitamins/fan.scad:34); unit mm: the BOM string appends mm to width = fan_width(type) and depth = fan_depth(type) (vitamins/fan.scad:53)specgithub.com 2026-11-16“fan60x25 = [60, 25, 57, 25, M4_dome_screw, 31.5, 3.6, 64, 7, 0, 63];”
Width60 mmNopSCADlib vitamins/fans.scad:35 row fan60x25, position 0 = fan_width() 'Width of square' (vitamins/fan.scad:33); unit mm: the BOM string appends mm to width = fan_width(type) and depth = fan_depth(type) (vitamins/fan.scad:53)specgithub.com 2026-11-16“fan60x25 = [60, 25, 57, 25, M4_dome_screw, 31.5, 3.6, 64, 7, 0, 63];”