
Generic fan60x15
Square axial fan frame 60x15 (fan60x15). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/fans.scad; positions read from the accessor functions in vitamins/fan.scad.
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Blade opening diameter | 57 mm | NopSCADlib vitamins/fans.scad:36 row fan60x15, position 2 = fan_bore() 'Diameter of the hole for the blades' (vitamins/fan.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“fan60x15 = [60, 15, 57, 25, M4_dome_screw, 29, 2.4, 60, 7, 7.7, 63];” |
| Depth | 15 mm | NopSCADlib vitamins/fans.scad:36 row fan60x15, position 1 = fan_depth() 'Depth of fan' (vitamins/fan.scad:34); unit mm: the BOM string appends mm to width = fan_width(type) and depth = fan_depth(type) (vitamins/fan.scad:53) | spec | github.com 2026-11-16“fan60x15 = [60, 15, 57, 25, M4_dome_screw, 29, 2.4, 60, 7, 7.7, 63];” |
| Width | 60 mm | NopSCADlib vitamins/fans.scad:36 row fan60x15, position 0 = fan_width() 'Width of square' (vitamins/fan.scad:33); unit mm: the BOM string appends mm to width = fan_width(type) and depth = fan_depth(type) (vitamins/fan.scad:53) | spec | github.com 2026-11-16“fan60x15 = [60, 15, 57, 25, M4_dome_screw, 29, 2.4, 60, 7, 7.7, 63];” |