
Generic fan30x10
Square axial fan frame 30x10 (fan30x10). Values from the NopSCADlib open-source OpenSCAD library (GPL-3.0-or-later), table vitamins/fans.scad; positions read from the accessor functions in vitamins/fan.scad.
Specifications
| Attribute | Value | Conditions | Type | Source, read date, quote |
|---|---|---|---|---|
| Blade opening diameter | 27 mm | NopSCADlib vitamins/fans.scad:39 row fan30x10, position 2 = fan_bore() 'Diameter of the hole for the blades' (vitamins/fan.scad:35); unit mm: library-wide: mm(x) = x ('Explicit mm specified') and inch(x) = x * 25.4 ('Inch to mm conversion'): a bare number is mm (utils/core/global.scad:29) | spec | github.com 2026-11-16“fan30x10 = [30, 10, 27, 12, M3_dome_screw, 17, 10, 100, 5, 0, undef];” |
| Depth | 10 mm | NopSCADlib vitamins/fans.scad:39 row fan30x10, position 1 = fan_depth() 'Depth of fan' (vitamins/fan.scad:34); unit mm: the BOM string appends mm to width = fan_width(type) and depth = fan_depth(type) (vitamins/fan.scad:53) | spec | github.com 2026-11-16“fan30x10 = [30, 10, 27, 12, M3_dome_screw, 17, 10, 100, 5, 0, undef];” |
| Width | 30 mm | NopSCADlib vitamins/fans.scad:39 row fan30x10, position 0 = fan_width() 'Width of square' (vitamins/fan.scad:33); unit mm: the BOM string appends mm to width = fan_width(type) and depth = fan_depth(type) (vitamins/fan.scad:53) | spec | github.com 2026-11-16“fan30x10 = [30, 10, 27, 12, M3_dome_screw, 17, 10, 100, 5, 0, undef];” |