| Current rating | 0.7 A stated as ampacity | NASA EEE-INST-002 Table 4A derated current, bundled wire or multi-conductor cable; ambient 70 C or less, hard vacuum 1E-6 torr, 200 C rated wire such as PTFE; use 80 percent for 150 C wire and 70 percent for 135 C wire | spec | nepp.nasa.gov 2026-11-08“30 1.3 0.7” |
|---|
| 1.3 A stated as ampacity | NASA EEE-INST-002 Table 4A derated current, single wire; ambient 70 C or less, hard vacuum 1E-6 torr, 200 C rated wire such as PTFE; use 80 percent for 150 C wire and 70 percent for 135 C wire | spec | nepp.nasa.gov 2026-11-08“30 1.3 0.7” |
| 0.86 A stated as ampacity | PowerStream guideline, maximum amps for chassis wiring, meant for wiring in air and not in a bundle; the site calls it a rule of thumb | claim | powerstream.com 2026-11-09“30 0.01 0.254 0.0507 103.2 338.496 0.86 0.142” |
| 0.142 A stated as ampacity | PowerStream guideline, maximum amps for power transmission, uses 700 circular mils per amp, which the site calls very conservative | claim | powerstream.com 2026-11-09“30 0.01 0.254 0.0507 103.2 338.496 0.86 0.142” |
| 0.52 A stated as ampacity | Wikipedia AWG table, 60 C insulation column; enclosed wire at 30 C ambient, or single unbundled wires in equipment for 16 AWG and thinner | claim | en.wikipedia.org 2026-11-09“30 0.0100 0.255 99.7 39.3 0.101 0.0509 338.6 103.2 0.52 0.86 —” |
| 0.86 A stated as ampacity | Wikipedia AWG table, 75 C insulation column; enclosed wire at 30 C ambient, or single unbundled wires in equipment for 16 AWG and thinner | claim | en.wikipedia.org 2026-11-09“30 0.0100 0.255 99.7 39.3 0.101 0.0509 338.6 103.2 0.52 0.86 —” |
| Conductor area | 100 circular mils = 0.05067 mm² | NIST Handbook 100 Table 5, standard annealed copper, solid round AWG size; a stranded wire's area differs | spec | nvlpubs.nist.gov 2026-11-09“30 10.0 100 .000 078 5” |
|---|
| 0.0509 mm2 | Wikipedia AWG table, solid round conductor | claim | en.wikipedia.org 2026-11-09“30 0.0100 0.255 99.7 39.3 0.101 0.0509 338.6 103.2 0.52 0.86 —” |
| Resistance per length | 104.0 ohms per 1,000 feet | NIST Handbook 100 Table 5, standard annealed copper at 20 C, solid round AWG sizeReview note: The 5 is the last digit of the square-inch column (.000 078 5); NIST Table 5 gives 104 ohms per 1,000 feet for 30 AWG. | spec | nvlpubs.nist.gov 2026-11-09“30 10.0 100 .000 078 5” |
|---|
| 338.6 mOhm/m | Wikipedia AWG table, solid copper wire at 20 C, 100% IACS conductivityReview note: Temperature and solid-wire basis are lost: the table's footnote 7 says solid copper at 20 C and 100% IACS; the word annealed is not in the capture. | claim | en.wikipedia.org 2026-11-09“30 0.0100 0.255 99.7 39.3 0.101 0.0509 338.6 103.2 0.52 0.86 —” |