Drawing of the robot type, not this robot. Drawing: Suqoona Robotics. Schematic, not to scale.LEAP Hand v1
- Maker
- Carnegie Mellon University
- Type
- Gripper or end effector
- Open source
- yes
- Page
- https://github.com/robot-descriptions/robot_descriptions.py
Values from the upstream simulation model (12)
Joint limits, force limits and link masses in the model file. These are not maker datasheet values.
Show all 12
Values from the upstream simulation model| Attribute | Value | Detail | Type | Source, read date, quote |
|---|
| Joint effort limit 0 | 0.95 N·m | , not a maker datasheet; joint 0 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="0" type="revolute"> <origin xyz="-0.012200000000000007713 0.038099999999999994982 0.014500000000000000736" rpy="-1.570796326794896558 -1.0065212660796336576e-15 1.5707963267948943376" /> <parent link="mcp_joint" /> <child link="pip" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-1.047" upper = "1.047"/>” |
| Joint effort limit 1 | 0.95 N·m | , not a maker datasheet; joint 1 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="1" type="revolute"> <origin xyz="-0.0070952496528625457958 0.023057756134899472233 -0.01872240357846021927" rpy="1.5707963267948950037 1.5707963267948945596 0" /> <parent link="palm_lower" /> <child link="mcp_joint" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-0.314" upper = "2.23"/>” |
| Joint effort limit 2 | 0.95 N·m | , not a maker datasheet; joint 2 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="2" type="revolute"> <origin xyz="0.01499999999999996822 0.014299999999999904801 -0.012999999999999824196" rpy="1.5707963267948958919 -1.570796326794896336 0" /> <parent link="pip" /> <child link="dip" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-0.506" upper = "1.885"/>” |
| Joint effort limit 3 | 0.95 N·m | , not a maker datasheet; joint 3 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="3" type="revolute"> <origin xyz="-4.0880582495572692636e-09 -0.036100004210367367397 0.00020000000000007858714" rpy="4.5935029425113685044e-17 -2.8730071914463794583e-16 4.4395481053923607589e-32" /> <parent link="dip" /> <child link="fingertip" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-0.366" upper = "2.042"/>” |
| Joint effort limit 4 | 0.95 N·m | , not a maker datasheet; joint 4 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="4" type="revolute"> <origin xyz="-0.012200000000000019856 0.038099999999999981104 0.01450000000000000594" rpy="-1.570796326794896558 -1.0065212760057939085e-15 1.5707963267948943376" /> <parent link="mcp_joint_2" /> <child link="pip_2" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-1.047" upper = "1.047"/>” |
| Joint effort limit 5 | 0.95 N·m | , not a maker datasheet; joint 5 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="5" type="revolute"> <origin xyz="-0.0070952496528625388569 -0.022392243865100525113 -0.018722403578460229678" rpy="1.570796326794896558 1.570796326794896558 0" /> <parent link="palm_lower" /> <child link="mcp_joint_2" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-0.314" upper = "2.23"/>” |
| Joint velocity limit 0 | 8.48 rad/s | , not a maker datasheet; joint 0 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="0" type="revolute"> <origin xyz="-0.012200000000000007713 0.038099999999999994982 0.014500000000000000736" rpy="-1.570796326794896558 -1.0065212660796336576e-15 1.5707963267948943376" /> <parent link="mcp_joint" /> <child link="pip" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-1.047" upper = "1.047"/>” |
| Joint velocity limit 1 | 8.48 rad/s | , not a maker datasheet; joint 1 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="1" type="revolute"> <origin xyz="-0.0070952496528625457958 0.023057756134899472233 -0.01872240357846021927" rpy="1.5707963267948950037 1.5707963267948945596 0" /> <parent link="palm_lower" /> <child link="mcp_joint" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-0.314" upper = "2.23"/>” |
| Joint velocity limit 2 | 8.48 rad/s | , not a maker datasheet; joint 2 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="2" type="revolute"> <origin xyz="0.01499999999999996822 0.014299999999999904801 -0.012999999999999824196" rpy="1.5707963267948958919 -1.570796326794896336 0" /> <parent link="pip" /> <child link="dip" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-0.506" upper = "1.885"/>” |
| Joint velocity limit 3 | 8.48 rad/s | , not a maker datasheet; joint 3 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="3" type="revolute"> <origin xyz="-4.0880582495572692636e-09 -0.036100004210367367397 0.00020000000000007858714" rpy="4.5935029425113685044e-17 -2.8730071914463794583e-16 4.4395481053923607589e-32" /> <parent link="dip" /> <child link="fingertip" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-0.366" upper = "2.042"/>” |
| Joint velocity limit 4 | 8.48 rad/s | , not a maker datasheet; joint 4 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="4" type="revolute"> <origin xyz="-0.012200000000000019856 0.038099999999999981104 0.01450000000000000594" rpy="-1.570796326794896558 -1.0065212760057939085e-15 1.5707963267948943376" /> <parent link="mcp_joint_2" /> <child link="pip_2" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-1.047" upper = "1.047"/>” |
| Joint velocity limit 5 | 8.48 rad/s | , not a maker datasheet; joint 5 | sim-model | raw.githubusercontent.com 2026-11-08“<joint name="5" type="revolute"> <origin xyz="-0.0070952496528625388569 -0.022392243865100525113 -0.018722403578460229678" rpy="1.570796326794896558 1.570796326794896558 0" /> <parent link="palm_lower" /> <child link="mcp_joint_2" /> <axis xyz="0 0 -1"/> <limit effort="0.95" velocity="8.48" lower = "-0.314" upper = "2.23"/>” |
Simulation models