| Actuator force range arm extend | -56 to 56 N·m | (hello_robot_stretch/stretch.xml), not a maker datasheet; actuator arm_extend; forcerange set in default class | sim-model | raw.githubusercontent.com 2026-11-08“forcerange="-56 56"” |
| Actuator force range forward | -100 to 100 N·m | (hello_robot_stretch/stretch.xml), not a maker datasheet; actuator forward; forcerange set in default class | sim-model | raw.githubusercontent.com 2026-11-08“forcerange="-100 100"” |
| Actuator force range left wheel vel | -100 to 100 N·m | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; actuator left_wheel_vel; forcerange set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“forcerange="-100 100"” |
| Actuator force range lift | -56 to 56 N·m | (hello_robot_stretch/stretch.xml), not a maker datasheet; actuator lift; forcerange set in default class | sim-model | raw.githubusercontent.com 2026-11-08“forcerange="-56 56"” |
| Actuator force range right wheel vel | -100 to 100 N·m | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; actuator right_wheel_vel; forcerange set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“forcerange="-100 100"” |
| Actuator force range turn | -100 to 100 N·m | (hello_robot_stretch/stretch.xml), not a maker datasheet; actuator turn; forcerange set in default class | sim-model | raw.githubusercontent.com 2026-11-08“forcerange="-100 100"” |
| Actuator force range wrist yaw | -5 to 5 N·m | (hello_robot_stretch/stretch.xml), not a maker datasheet; actuator wrist_yaw; forcerange set in default class | sim-model | raw.githubusercontent.com 2026-11-08“forcerange="-5 5"” |
| Joint range joint arm l0 | 0 to 0.13 m | (hello_robot_stretch/stretch.xml), not a maker datasheet; joint joint_arm_l0; range set in default class | sim-model | raw.githubusercontent.com 2026-11-08“range="0 0.13"” |
| Joint range joint arm l0 | 0 to 0.13 m | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_arm_l0; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="0 0.13"” |
| Joint range joint arm l1 | 0 to 0.13 m | (hello_robot_stretch/stretch.xml), not a maker datasheet; joint joint_arm_l1; range set in default class | sim-model | raw.githubusercontent.com 2026-11-08“range="0 0.13"” |
| Joint range joint arm l1 | 0 to 0.13 m | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_arm_l1; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="0 0.13"” |
| Joint range joint arm l2 | 0 to 0.13 m | (hello_robot_stretch/stretch.xml), not a maker datasheet; joint joint_arm_l2; range set in default class | sim-model | raw.githubusercontent.com 2026-11-08“range="0 0.13"” |
| Joint range joint arm l2 | 0 to 0.13 m | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_arm_l2; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="0 0.13"” |
| Joint range joint arm l3 | 0 to 0.13 m | (hello_robot_stretch/stretch.xml), not a maker datasheet; joint joint_arm_l3; range set in default class | sim-model | raw.githubusercontent.com 2026-11-08“range="0 0.13"” |
| Joint range joint arm l3 | 0 to 0.13 m | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_arm_l3; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="0 0.13"” |
| Joint range joint gripper finger left open | -0.6 to 0.6 rad | (hello_robot_stretch/stretch.xml), not a maker datasheet; joint joint_gripper_finger_left_open; range set in default class | sim-model | raw.githubusercontent.com 2026-11-08“range="-0.6 0.6"” |
| Joint range joint gripper finger left open | -0.6 to 0.6 rad | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_gripper_finger_left_open; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="-0.6 0.6"” |
| Joint range joint gripper finger right open | -0.6 to 0.6 rad | (hello_robot_stretch/stretch.xml), not a maker datasheet; joint joint_gripper_finger_right_open; range set in default class | sim-model | raw.githubusercontent.com 2026-11-08“range="-0.6 0.6"” |
| Joint range joint gripper finger right open | -0.6 to 0.6 rad | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_gripper_finger_right_open; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="-0.6 0.6"” |
| Joint range joint head nav cam | -1.53 to 0.79 rad | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_head_nav_cam; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="-1.53 0.79"” |
| Joint range joint head pan | -3.9 to 1.5 rad | (hello_robot_stretch/stretch.xml), not a maker datasheet; joint joint_head_pan; range set in default class | sim-model | raw.githubusercontent.com 2026-11-08“range="-3.9 1.5"” |
| Joint range joint head pan | -4.04 to 1.73 rad | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_head_pan; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="-4.04 1.73"” |
| Joint range joint head tilt | -1.53 to 0.79 rad | (hello_robot_stretch/stretch.xml), not a maker datasheet; joint joint_head_tilt; range set in default class | sim-model | raw.githubusercontent.com 2026-11-08“range="-1.53 0.79"” |
| Joint range joint head tilt | -1.53 to 0.79 rad | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_head_tilt; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="-1.53 0.79"” |
| Joint range joint lift | 0.0 to 1.1 m | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_lift; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="0.0 1.1"” |
| Joint range joint wrist pitch | -1.57 to 0.56 rad | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_wrist_pitch; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="-1.57 0.56"” |
| Joint range joint wrist roll | -3.14 to 3.14 rad | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_wrist_roll; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="-3.14 3.14"” |
| Joint range joint wrist yaw | -1.75 to 4 rad | (hello_robot_stretch/stretch.xml), not a maker datasheet; joint joint_wrist_yaw; range set in default class | sim-model | raw.githubusercontent.com 2026-11-08“range="-1.75 4"” |
| Joint range joint wrist yaw | -1.39 to 4.42 rad | (hello_robot_stretch_3/stretch.xml), not a maker datasheet; joint joint_wrist_yaw; range set in default classReview note: Source is the Stretch 3 model file (hello_robot_stretch_3/stretch.xml), not a Stretch 2 model. | sim-model | raw.githubusercontent.com 2026-11-08“range="-1.39 4.42"” |