Robots › SO-ARM102
SO-ARM102: drawing of its robot type
Drawing of the robot type, not this robot. Drawing: Suqoona Robotics. Schematic, not to scale.

SO-ARM102

Maker
Robonine
Type
Arm
Open source
yes
Page
https://github.com/robot-descriptions/robot_descriptions.py

Specifications

Specifications
AttributeValueConditionsTypeSource, read date, quote
Dof5 DOFPlus a gripper.claimraw.githubusercontent.com 2026-11-09“Each arm has five degrees of freedom plus a gripper.”
Payload300 gSO-ARM 102 column.claimraw.githubusercontent.com 2026-11-09“| Rated payload | 150 g | 300 g | |”
Reach483 mmComputed by the maker from 100,000 random poses within joint limits.claimraw.githubusercontent.com 2026-11-09“| Horizontal radius | 483 mm |”
Repeatability0.1 mmSO-ARM 102 column of the maker's measured results, on Robonine prototypes, August and September 2026.measuredraw.githubusercontent.com 2026-11-09“| Repeatability | — | about 0.1 mm | |”

Values from the upstream simulation model (12)

Joint limits, force limits and link masses in the model file. These are not maker datasheet values.

Show all 12
Values from the upstream simulation model
AttributeValueDetailTypeSource, read date, quote
Joint effort limit base to link1100 N·m, not a maker datasheet; joint base_to_link1sim-modelraw.githubusercontent.com 2026-11-08“<joint name="base_to_link1" type="revolute"> <origin xyz="-0.006 -1.10978314851e-16 0.025" rpy="0 0 0" /> <parent link="base_link" /> <child link="link1_1" /> <axis xyz="-3.48927236311e-15 -1.38855301773e-17 -1" /> <limit effort="100" velocity="100" lower="-3.07177948351" upper="3.07177948351" />”
Joint effort limit link1 to link2100 N·m, not a maker datasheet; joint link1_to_link2sim-modelraw.githubusercontent.com 2026-11-08“<joint name="link1_to_link2" type="revolute"> <origin xyz="0.04 -0.018 0.073356707952" rpy="0 0 0" /> <parent link="link1_1" /> <child link="link2_1" /> <axis xyz="3.7576779295e-14 -1 3.11848821907e-14" /> <limit effort="100" velocity="100" lower="-2.32128790515" upper="1.58824961931" />”
Joint effort limit link2 to link3100 N·m, not a maker datasheet; joint link2_to_link3sim-modelraw.githubusercontent.com 2026-11-08“<joint name="link2_to_link3" type="revolute"> <origin xyz="3.39589458789e-05 0.035999879491 0.113000833762" rpy="0 0 0" /> <parent link="link2_1" /> <child link="link3_1" /> <axis xyz="5.4643524895e-08 -1 3.71447673953e-08" /> <limit effort="100" velocity="100" lower="-1.57079632679" upper="2.67035375555" />”
Joint effort limit link3 to link4100 N·m, not a maker datasheet; joint link3_to_link4sim-modelraw.githubusercontent.com 2026-11-08“<joint name="link3_to_link4" type="revolute"> <origin xyz="0.135059233654 -2.61233757511e-07 0.0336375809223" rpy="0 0 0" /> <parent link="link3_1" /> <child link="link4_1" /> <axis xyz="-5.21611917629e-08 1 -3.41984371354e-08" /> <limit effort="100" velocity="100" lower="-1.72787595947" upper="1.69296937443" />”
Joint range base to link1-3.07177948351 to 3.07177948351 rad, not a maker datasheet; joint base_to_link1sim-modelraw.githubusercontent.com 2026-11-08“<joint name="base_to_link1" type="revolute"> <origin xyz="-0.006 -1.10978314851e-16 0.025" rpy="0 0 0" /> <parent link="base_link" /> <child link="link1_1" /> <axis xyz="-3.48927236311e-15 -1.38855301773e-17 -1" /> <limit effort="100" velocity="100" lower="-3.07177948351" upper="3.07177948351" />”
Joint range link1 to link2-2.32128790515 to 1.58824961931 rad, not a maker datasheet; joint link1_to_link2sim-modelraw.githubusercontent.com 2026-11-08“<joint name="link1_to_link2" type="revolute"> <origin xyz="0.04 -0.018 0.073356707952" rpy="0 0 0" /> <parent link="link1_1" /> <child link="link2_1" /> <axis xyz="3.7576779295e-14 -1 3.11848821907e-14" /> <limit effort="100" velocity="100" lower="-2.32128790515" upper="1.58824961931" />”
Joint range link2 to link3-1.57079632679 to 2.67035375555 rad, not a maker datasheet; joint link2_to_link3sim-modelraw.githubusercontent.com 2026-11-08“<joint name="link2_to_link3" type="revolute"> <origin xyz="3.39589458789e-05 0.035999879491 0.113000833762" rpy="0 0 0" /> <parent link="link2_1" /> <child link="link3_1" /> <axis xyz="5.4643524895e-08 -1 3.71447673953e-08" /> <limit effort="100" velocity="100" lower="-1.57079632679" upper="2.67035375555" />”
Joint range link3 to link4-1.72787595947 to 1.69296937443 rad, not a maker datasheet; joint link3_to_link4sim-modelraw.githubusercontent.com 2026-11-08“<joint name="link3_to_link4" type="revolute"> <origin xyz="0.135059233654 -2.61233757511e-07 0.0336375809223" rpy="0 0 0" /> <parent link="link3_1" /> <child link="link4_1" /> <axis xyz="-5.21611917629e-08 1 -3.41984371354e-08" /> <limit effort="100" velocity="100" lower="-1.72787595947" upper="1.69296937443" />”
Joint velocity limit base to link1100 rad/s, not a maker datasheet; joint base_to_link1sim-modelraw.githubusercontent.com 2026-11-08“<joint name="base_to_link1" type="revolute"> <origin xyz="-0.006 -1.10978314851e-16 0.025" rpy="0 0 0" /> <parent link="base_link" /> <child link="link1_1" /> <axis xyz="-3.48927236311e-15 -1.38855301773e-17 -1" /> <limit effort="100" velocity="100" lower="-3.07177948351" upper="3.07177948351" />”
Joint velocity limit link1 to link2100 rad/s, not a maker datasheet; joint link1_to_link2sim-modelraw.githubusercontent.com 2026-11-08“<joint name="link1_to_link2" type="revolute"> <origin xyz="0.04 -0.018 0.073356707952" rpy="0 0 0" /> <parent link="link1_1" /> <child link="link2_1" /> <axis xyz="3.7576779295e-14 -1 3.11848821907e-14" /> <limit effort="100" velocity="100" lower="-2.32128790515" upper="1.58824961931" />”
Joint velocity limit link2 to link3100 rad/s, not a maker datasheet; joint link2_to_link3sim-modelraw.githubusercontent.com 2026-11-08“<joint name="link2_to_link3" type="revolute"> <origin xyz="3.39589458789e-05 0.035999879491 0.113000833762" rpy="0 0 0" /> <parent link="link2_1" /> <child link="link3_1" /> <axis xyz="5.4643524895e-08 -1 3.71447673953e-08" /> <limit effort="100" velocity="100" lower="-1.57079632679" upper="2.67035375555" />”
Joint velocity limit link3 to link4100 rad/s, not a maker datasheet; joint link3_to_link4sim-modelraw.githubusercontent.com 2026-11-08“<joint name="link3_to_link4" type="revolute"> <origin xyz="0.135059233654 -2.61233757511e-07 0.0336375809223" rpy="0 0 0" /> <parent link="link3_1" /> <child link="link4_1" /> <axis xyz="-5.21611917629e-08 1 -3.41984371354e-08" /> <limit effort="100" velocity="100" lower="-1.72787595947" upper="1.69296937443" />”

Simulation models